Help For Blink Pro

Version 147 (Adrian Georgescu, 02/04/2014 12:26 pm)

1 147 Adrian Georgescu
h1. Help for Blink Pro and Blink Lite for OSX
2 1 Tijmen de Mes
3 147 Adrian Georgescu
For help on Blink QT go "here":http://projects.ag-projects.com/projects/blinkqt/wiki/Help
4 65 Adrian Georgescu
5 66 Adrian Georgescu
[[KnownIssues|Known issues and critical bug fixes]]
6 1 Tijmen de Mes
7 147 Adrian Georgescu
[[MostEncounteredProblems| Most Encountered Problems]]
8 1 Tijmen de Mes
9 1 Tijmen de Mes
10 147 Adrian Georgescu
Blink allows you to communicate in real time over the Internet. To use Blink you need a SIP account from a SIP service provider. Like using an email program, you must configure Blink with the account you have obtained from your service provider. If things do not work they way you expect, the reasons can be caused mainly by two things, one is Blink software itself and the another one is the communication with the SIP Service Provider. 
11 1 Tijmen de Mes
12 147 Adrian Georgescu
While Blink may not be bug free, most of the problems you encounter when using Blink are related to the network communication with the SIP Service Provider. It is not the end-user who should understand the mechanics about how things work, so the main responsibility of making sure that things work correct falls into the hands of the SIP service provider who must properly setup its SIP infrastructure and support its user base.
13 1 Tijmen de Mes
14 147 Adrian Georgescu
h2. Requesting Support 
15 1 Tijmen de Mes
16 147 Adrian Georgescu
h3. Public Forum Discussions
17 1 Tijmen de Mes
18 147 Adrian Georgescu
Go to "Blink Support Forum":http://support.icanblink.com 
19 1 Tijmen de Mes
20 147 Adrian Georgescu
h3. Support from Developers
21 1 Tijmen de Mes
22 147 Adrian Georgescu
If you need support for a particular problem you can mail us directly to support@ag-projects.com. Please try this as a last resort as the answer may already be available on the discussion forum or other users may have encountered your problem while the developers may not.
23 1 Tijmen de Mes
24 147 Adrian Georgescu
h3. Placing Calls Problems
25 1 Tijmen de Mes
26 147 Adrian Georgescu
To eliminate possible causes related to local network or service provider, please check if the problem can be reproduce by using the Free SIP Accounts provided with Blink.  
27 1 Tijmen de Mes
28 147 Adrian Georgescu
If you are unable to receive incoming or place outgoing calls do the following:
29 1 Tijmen de Mes
30 147 Adrian Georgescu
 * Make sure you run the last version available in the Mac App Store.
31 147 Adrian Georgescu
 * Go to  _Menu Window -> Logs -> SIP_ 
32 147 Adrian Georgescu
 * Make sure the box *Everything* is checked and from the drop down box is selected *Sessions*
33 147 Adrian Georgescu
 * Restart Blink
34 147 Adrian Georgescu
 * Attempt to make the call
35 147 Adrian Georgescu
 * Paste all logs from both the SIP and the Activity Logs windows into an email to support@ag-projects.com
36 1 Tijmen de Mes
37 147 Adrian Georgescu
h3. Non-critical Errors
38 1 Tijmen de Mes
39 147 Adrian Georgescu
Blink errors are logged in the OSX system log file _/var/log/system.log_. You can find them by opening _Applications -> Utilities -> Console_, selecting _LOG FILES -> system.log_ and typing Blink in the search bar. Please provide us with this information when you report the problem you encountered.
40 141 Adrian Georgescu
41 147 Adrian Georgescu
h3. Software Crashes
42 1 Tijmen de Mes
43 147 Adrian Georgescu
If you experience a software crash, please send the complete crash report available in the crash reporter window (just copy and paste from it). 
44 1 Tijmen de Mes
45 147 Adrian Georgescu
Crash reports are saved in _~/Library/Logs/DiagnosticReports/_.
46 1 Tijmen de Mes
47 147 Adrian Georgescu
h3. Configuration File
48 1 Tijmen de Mes
49 147 Adrian Georgescu
Blink accounts and settings are stored in a flat-text configuration file. 
50 1 Tijmen de Mes
51 147 Adrian Georgescu
 * Pro version: ~/Library/Containers/com.agprojects.Blink/Data/Library/Application Support/Blink Pro/config
52 147 Adrian Georgescu
 * Lite version: ~/Library/Containers/com.agprojects.BlinkLite/Data/Library/Application Support/Blink Lite/config
53 147 Adrian Georgescu
 * SIP2SIP version: ~/Library/Application Support/SIP2SIP/config
54 1 Tijmen de Mes
55 147 Adrian Georgescu
Do not edit this file manually. If you did and Blink does not start you must delete the file and start all over again. 
56 1 Tijmen de Mes
57 147 Adrian Georgescu
Please report your OS name and version and Blink version. You can find Blink version in menu _Blink -> About_.
58 1 Tijmen de Mes
59 147 Adrian Georgescu
Passwords are not stored in the configuration file but in the system keychain.
60 1 Tijmen de Mes
61 147 Adrian Georgescu
h2. Differences between Pro and Lite versions
62 1 Tijmen de Mes
63 147 Adrian Georgescu
Compared to Blink Lite, Blink Pro has the following extra features: 
64 1 Tijmen de Mes
65 147 Adrian Georgescu
 * OSX Integration (iCloud, iTunes, Address Book, Key Chain, Voice Over)
66 147 Adrian Georgescu
 * Unlimited number of accounts
67 147 Adrian Georgescu
 * History browser for all media
68 147 Adrian Georgescu
 * Phone number translations
69 147 Adrian Georgescu
 * Call transfer
70 147 Adrian Georgescu
 * Call recording
71 147 Adrian Georgescu
 * LDAP server support
72 147 Adrian Georgescu
 * Incoming call web page integration
73 147 Adrian Georgescu
 * AddressBook plugin
74 147 Adrian Georgescu
 * More granular settings
75 1 Tijmen de Mes
76 147 Adrian Georgescu
SIP2SIP version is equivalent with Pro version but it can only use one account from sip2sip.info service.
77 1 Tijmen de Mes
78 147 Adrian Georgescu
h2. Refund Policy
79 1 Tijmen de Mes
80 147 Adrian Georgescu
If you purchased an application on Mac app Store that you are not happy with you are stuck with it. If you are not happy with this policy it is Apple you must complain to, not us as they made these rules. 
81 1 Tijmen de Mes
82 147 Adrian Georgescu
h2. SIP Accounts
83 1 Tijmen de Mes
84 140 Adrian Georgescu
To use Blink, you need a SIP Account. At first start, Blink shows the _Add Account_ "window":http://icanblink.com/screenshots.phtml#enrollment that helps you configure the initial SIP Account.
85 141 Adrian Georgescu
86 140 Adrian Georgescu
You may configure Blink to use multiple SIP Accounts. To add a new SIP Account, go to menu _Preferences->Accounts_ and click the + button. The _Add Account_ window shows up and you can repeat the steps described above. After you have configured a SIP Account, you can see the status of the registration in the account list of _Main Window_ window. Solid color means that the account has successfully registered, gray color means that the registration has failed or is in progress. You can also see the status of the registration in the account list of _Preferences_ window. Green color means that the account has successfully registered, Red color the registration has failed and Yellow means that he registration process is in progress. A successful registration means that you are able to receive incoming calls with Blink.
87 147 Adrian Georgescu
 
88 141 Adrian Georgescu
h3. Add an Existing SIP Account
89 1 Tijmen de Mes
90 147 Adrian Georgescu
If you already have a SIP account from a SIP service provider, select this option then enter the SIP address in the form of _user@domain_ and the _password_. If the SIP service provider has set his infrastructure correctly, all server address settings will be automatically discovered by entering the SIP address and password. 
91 1 Tijmen de Mes
92 147 Adrian Georgescu
Unfortunately, most SIP service providers do not tell their users what their SIP address is.  Imagine your email provider giving you an account without telling you what is your email address…
93 147 Adrian Georgescu
94 147 Adrian Georgescu
The reason for making things complicated is that SIP service providers are either un-willing or incapable of setting up their DNS and SIP infrastructure correctly and confuse users about how to configure their SIP accounts.
95 147 Adrian Georgescu
96 147 Adrian Georgescu
Such providers typically provide separate username and server address information instead of a SIP address. The SIP address is composed by concatenating the username part and the server part format with an @ sign. Additional manual settings for the server address, transport and protocols can be made in Advanced Account Settings explained below.
97 147 Adrian Georgescu
98 147 Adrian Georgescu
h4. The username
99 147 Adrian Georgescu
100 147 Adrian Georgescu
Different SIP service providers may refer to this in such ways, they are all the same thing:
101 147 Adrian Georgescu
102 147 Adrian Georgescu
 * Username
103 147 Adrian Georgescu
 * Account number
104 147 Adrian Georgescu
 * Authentication Name
105 147 Adrian Georgescu
 * Login name
106 147 Adrian Georgescu
 * Phone number
107 147 Adrian Georgescu
 * Extension number
108 147 Adrian Georgescu
 * Number
109 147 Adrian Georgescu
110 147 Adrian Georgescu
h4. The server
111 147 Adrian Georgescu
112 147 Adrian Georgescu
Different SIP service providers may refer to this in such ways, they are all the same thing:
113 147 Adrian Georgescu
114 147 Adrian Georgescu
 * Server name
115 147 Adrian Georgescu
 * Server address
116 147 Adrian Georgescu
 * IP address
117 147 Adrian Georgescu
 * Proxy address
118 147 Adrian Georgescu
 * Outbound Proxy
119 147 Adrian Georgescu
 * Domain
120 147 Adrian Georgescu
 * Realm
121 147 Adrian Georgescu
 * SIP server
122 147 Adrian Georgescu
 * SIP registrar
123 147 Adrian Georgescu
124 147 Adrian Georgescu
Concatenate the username part and the server part as follows:
125 147 Adrian Georgescu
126 147 Adrian Georgescu
username@server
127 147 Adrian Georgescu
128 1 Tijmen de Mes
h3. Create a Free SIP Account
129 141 Adrian Georgescu
130 147 Adrian Georgescu
Use this option if you do not have a SIP Account, Blink can create one for you using the free service provided by SIP2SIP. All Blink features are supported by this service.
131 1 Tijmen de Mes
132 1 Tijmen de Mes
For more information about the features of the SIP service go to "http://sip2sip.info":http://wiki.sip2sip.info
133 1 Tijmen de Mes
134 147 Adrian Georgescu
It is recommended that you always create such account to benefit of the features beyond VoIP provided by Blink. Using a sip2sip.info account you can sync the address book between multiple instances of Blink, bridge to XMPP domains and create multi party conferences.
135 1 Tijmen de Mes
136 147 Adrian Georgescu
h3. iCloud sync
137 147 Adrian Georgescu
138 147 Adrian Georgescu
The default option is to sync the new account across all computers configured for the the same iCloud account. This means that any changes to any account will be synchronised across all your computers running Blink.
139 147 Adrian Georgescu
140 1 Tijmen de Mes
h3. Advanced Account Settings
141 141 Adrian Georgescu
142 135 Adrian Georgescu
h4. Outbound Proxy
143 1 Tijmen de Mes
144 1 Tijmen de Mes
If the SIP provider does not have proper DNS records set for his domain to point to its SIP server address and port numbers as defined by RFC3263, Blink will not be able to auto-discover its location. In such case you must set the Outbound Proxy setting in _Preferences -> SIP Account -> Advanced -> SIP Signaling_. Also you can use this setting to force a specific transport or port different than the ones discovered from DNS. The outbound proxy format is _host.example.com:5060;transport=udp_.
145 1 Tijmen de Mes
146 1 Tijmen de Mes
h2. Main Interface
147 1 Tijmen de Mes
148 1 Tijmen de Mes
Blink presents a _Contacts driven_ "interface":http://icanblink.com/screenshots.phtml#main_interface as the main window. The design allows to locate a Contact then to start an action for it, for example to start an _Audio Call_. You can toggle to and from a dial-pad interface in the _Contacts_ menu.
149 1 Tijmen de Mes
150 1 Tijmen de Mes
The main interface can be collapsed into a "compact mode":http://icanblink.com/screenshots.phtml#collapsed_gui that hides the Contact List or dialpad. Click on the *+* Green button of the window to collapse and expand the main interface.
151 138 Tijmen de Mes
152 1 Tijmen de Mes
Hover the mouse over the GUI elements to see a short description of their function.
153 1 Tijmen de Mes
154 147 Adrian Georgescu
h3. SIP Account
155 140 Adrian Georgescu
156 147 Adrian Georgescu
You can select the SIP Account used for outbound sessions in the _Accounts drop down box_ presented on the top of the main interface.
157 1 Tijmen de Mes
158 147 Adrian Georgescu
h4. Bonjour Account
159 147 Adrian Georgescu
160 147 Adrian Georgescu
_Bonjour Account_ is a special type of account that is designed to announce itself and discover other neighbours on the local area network. This account does not require a server or SIP service in order to operate.
161 147 Adrian Georgescu
162 1 Tijmen de Mes
h3. Search Bar
163 141 Adrian Georgescu
164 115 Adrian Georgescu
The Search bar is used for finding an existing contact or for entering a SIP address or telephone number.
165 1 Tijmen de Mes
166 1 Tijmen de Mes
To search for a contact in Blink's _Contacts List_, system _Address Book_ and optionally configured LDAP directory of the active account, fill in the name in the _Search Bar_. You may select a Contact that matched the typed text or use the typed text as the Contact for the next action.
167 1 Tijmen de Mes
168 1 Tijmen de Mes
Use the buttons presented at the bottom of the main window to start a session to the current selected Contact or press on _Add Contact_ to add the typed address to the _Contacts List_.
169 1 Tijmen de Mes
170 1 Tijmen de Mes
Pressing enter or return after entering text in the search bar will start an audio call to that address.
171 1 Tijmen de Mes
172 1 Tijmen de Mes
h3. Contacts List
173 1 Tijmen de Mes
174 147 Adrian Georgescu
Contacts can be organized in Groups. The Groups support ordering and can be collapsed or expanded when clicking on their left-side triangle. Groups can be dragged in different order. Contacts can be dragged from one group to another, they are sorted by name.
175 1 Tijmen de Mes
176 147 Adrian Georgescu
 * Right click on a Contact to see all possible actions for each of them.
177 147 Adrian Georgescu
 * Right click on a Group to see all possible actions for each of them.
178 1 Tijmen de Mes
179 147 Adrian Georgescu
h4. Address Book Group
180 1 Tijmen de Mes
181 1 Tijmen de Mes
The group named _Address Book_ cannot be deleted, it is dynamically populated with entries from the system _Address Book_. To reload changes made in the _Address Book_ collapse and expand the group again.
182 1 Tijmen de Mes
183 1 Tijmen de Mes
For Address Book entries, to have a SIP Address recognized by Blink you must have entries in either Email or URL sections that start with the _sip:_ prefix.
184 1 Tijmen de Mes
185 1 Tijmen de Mes
One can initiate an audio call using Blink Pro directly from the AddressBook application by clicking on the Phone, Email or URL fields of an AddressBook contact. For this you must install the AddressBook plugins available at:
186 1 Tijmen de Mes
187 1 Tijmen de Mes
"http://download.ag-projects .com/BlinkABPlugins/":http://download.ag-projects.com/BlinkABPlugins/
188 1 Tijmen de Mes
189 147 Adrian Georgescu
The plugins work with Blink Pro version only.
190 1 Tijmen de Mes
191 147 Adrian Georgescu
h4. Bonjour Neighbours Group
192 1 Tijmen de Mes
193 1 Tijmen de Mes
_Bonjour Neighbours_ appear in the _Contacts List_ as a separate Group. When selecting _Bonjour_ as the default account, _Bonjour Neighbours_ group is expanded and moved on top of the Contacts list. When changing back to a regular SIP Account, the groups in the Contacts list reshuffle to their previous positions.
194 1 Tijmen de Mes
195 1 Tijmen de Mes
Chat sessions are automatically accepted from Bonjour Neighbours.
196 1 Tijmen de Mes
197 1 Tijmen de Mes
Audio sessions can be automatically accepted based on the correspondent setting from Account menu.
198 1 Tijmen de Mes
199 147 Adrian Georgescu
h4. History Groups
200 147 Adrian Georgescu
201 147 Adrian Georgescu
Special groups can be enabled to display Incoming, Missed and Outgoing Calls. Entries can be individually hidden and the period of the calls can be selected
202 147 Adrian Georgescu
203 147 Adrian Georgescu
h4. Online Group
204 147 Adrian Georgescu
205 147 Adrian Georgescu
This special group displays contacts that have published availability information.
206 147 Adrian Georgescu
207 123 Tijmen de Mes
h4. Edit Contact
208 128 Tijmen de Mes
209 138 Tijmen de Mes
You can edit a Contact by right clicking on it and select Edit menu option. _Edit Contact_ "window":http://icanblink.com/screenshots.phtml#add_contact appears. To set the _Icon for the Contact_, click on the Icon area, a file selection dialog appears.
210 141 Adrian Georgescu
211 138 Tijmen de Mes
h4. Add Contact
212 138 Tijmen de Mes
213 147 Adrian Georgescu
You can add a Contact to the _Contacts List_ by clicking on the groups icon button presented on the bottom left of the main interface. _Add Contact_ "window":http://icanblink.com/screenshots.phtml#add_contact appears.
214 123 Tijmen de Mes
215 134 Tijmen de Mes
h4. Server Storage
216 141 Adrian Georgescu
217 134 Tijmen de Mes
If a contact is associated with an account and the SIP service that provides the account has XCAP storage capabilities, the contact is then also stored on the XCAP server. Multiple Blink instances can be synchronized in real time by using this feature. If your particular SIP service does not support XCAP storage, just add a SIP account from within Blink.
218 141 Adrian Georgescu
219 141 Adrian Georgescu
220 128 Tijmen de Mes
h3. Start Session
221 138 Tijmen de Mes
222 128 Tijmen de Mes
Use the buttons presented at the bottom of the main window to start a session to the current selected Contact.
223 138 Tijmen de Mes
224 138 Tijmen de Mes
Clicking on _Return key_ or double-clicking a Contact will start the default session type depending on the preferred media configured for each Contact. The default action is to start an _Audio Call_.
225 138 Tijmen de Mes
226 147 Adrian Georgescu
h2. Alert Panel
227 134 Tijmen de Mes
228 147 Adrian Georgescu
Incoming session requests bring up the "Alert Panel":http://icanblink.com/screenshots.phtml#alert_panel</em>. Click on the _Accept Button_ to accept a session request. There are two options for rejecting an incoming session request:
229 134 Tijmen de Mes
230 141 Adrian Georgescu
* Click on the _Reject button_. The session is rejected with SIP response code 603 and all other SIP devices registered for the same account stop ringing. Forwarding to voicemail or other destinations, when available in the SIP server is also cancelled. You must use this option to terminate all call processing associated with the request.
231 141 Adrian Georgescu
* Click on the _Busy button_. Blink sends a 486 code back to the caller and stops ringing, other SIP devices keep ringing and forwarding to other destinations remains active as set in the SIP server. You must use this option when you want to pick up the call at a different location or allow the Server to perform other pre-configured routing decisions.
232 141 Adrian Georgescu
233 141 Adrian Georgescu
When the _Answering Machine_ is enabled, a countdown appears in the Alert Panel. While the countdown counts you can still disable the _Answering Machine_ from the Account menu.
234 138 Tijmen de Mes
235 138 Tijmen de Mes
The currently selected input and output audio devices are showed for incoming Audio Call requests.
236 138 Tijmen de Mes
237 138 Tijmen de Mes
h2. Audio Calls
238 138 Tijmen de Mes
239 138 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-AudioSessions.jpg!
240 138 Tijmen de Mes
_Audio Calls_ are displayed in the lateral "drawer":http://icanblink.com/screenshots.phtml#audio_sessions attached to the main interface.
241 141 Adrian Georgescu
242 141 Adrian Georgescu
To start an _Audio Call_, select an existing contact or enter a SIP address or telephone number in the search bar. Once text is entered in the search bar just press enter to start an audio call to that address. Alternatively, you can turn on the dialpad in the Contacts menu and press its keys.
243 141 Adrian Georgescu
244 141 Adrian Georgescu
When a Contact is selected, you may click on the _Green Handset_ located at the bottom of the main interface or right click on thr Contact and select _Start Audio Session_ from the contextual menu. For each new call an entry is added to the _Audio Calls_ drawer.
245 141 Adrian Georgescu
246 141 Adrian Georgescu
To switch between multiple calls just click on another call in the audio sessions drawer. When switching to a particular session, the audio stream is connected to the input and output device and all other Audio Calls are put on hold.
247 141 Adrian Georgescu
248 141 Adrian Georgescu
To add _Chat_ to an existing _Audio Call_, right click on the session displayed in the Audio Drawer and select an _Add Chat_
249 141 Adrian Georgescu
250 141 Adrian Georgescu
To mute your microphone click on the bottom right microphone icon. To un-mute click it again.
251 141 Adrian Georgescu
252 147 Adrian Georgescu
h3. Audio Codecs
253 141 Adrian Georgescu
254 141 Adrian Georgescu
Audio codecs can be set in _Preferences -&gt; Advanced -&gt; RTP Media_ section and can be overwritten per account in _Advanced -&gt; RTP Media section_. By default, the audio codecs are prioritized to allow for highest quality and second, compatibility with SIP services.
255 141 Adrian Georgescu
256 147 Adrian Georgescu
If you have changed the defaults or want to set the codecs manually, for high quality conversations is recommended to use OPUS, Speex, G.722 codec order and leave PCMA and PCMU enabled for compatibility reasons. 
257 141 Adrian Georgescu
258 147 Adrian Georgescu
Some details about the codecs used by Blink:
259 140 Adrian Georgescu
260 147 Adrian Georgescu
* OPUS is the best codec choice covering full human audible spectrum and requires between 20 and 60kbit/s network bandwidth. This codec is available in Blink Pro 3.0.
261 147 Adrian Georgescu
* Speex is a high quality codec that is often built in softphones covering up to 16kHz audio spectrum and requires about 50kbit/s network bandwidth
262 147 Adrian Georgescu
* G.722 is the most compatible wideband codec supported by both software and hardware phones covering 11kHz audio spectrum and requires about 100kbit/s network bandwidth
263 147 Adrian Georgescu
* PCMA (G711A) and PCMU (G711U) are the most interoperable codecs narrowband that work with any device covering up to 4kHz audio spectrum (telephone quality)  and requires about 100kbit/s network bandwidth
264 147 Adrian Georgescu
* GSM and iLBC use less bandwidth than the other codecs but they have less support in other devices and cover up to 4kHz audio spectrum and requires up to 40kbit/s network bandwidth
265 147 Adrian Georgescu
266 147 Adrian Georgescu
h3. Best Speech Quality
267 147 Adrian Georgescu
268 147 Adrian Georgescu
To obtain best audio quality for speech you must:
269 147 Adrian Georgescu
270 147 Adrian Georgescu
 * Use a wideband codec like Speex, G.722 or OPUS
271 147 Adrian Georgescu
 * Have Acoustic Echo Cancellation enabled in Blink Audio Preferences, this will set the internal sampling rate to 32kHz covering up to 16kHz audio spectrum
272 147 Adrian Georgescu
 * Enable Ambient Noise Reduction in System Sound Preferences, this will remove the fan and other low frequency noises
273 147 Adrian Georgescu
 * If available bandwidth is an issue, use OPUS, Speex, G722 codecs order in Advanced RTP media preferences
274 147 Adrian Georgescu
275 147 Adrian Georgescu
You may use any headset or no headset (speakerphone mode).
276 147 Adrian Georgescu
277 147 Adrian Georgescu
h3. Best Studio Quality
278 147 Adrian Georgescu
279 147 Adrian Georgescu
To obtain best possible audio quality and remove all delays and distortions of the original signals introduced by the computer software and hardware you must do the following:
280 147 Adrian Georgescu
281 147 Adrian Georgescu
 * Use a high quality headsets and microphones (low delay at least 41000 Hz sample rate)
282 147 Adrian Georgescu
 * Disable Acoustic Echo Cancellation (AEC) in Blink Audio Preferences. This will disable the built-in noise reduction and echo cancellation algorithms as well as increasing the internal sampling rate to 48kHz
283 147 Adrian Georgescu
 * Disable Ambient Noise Reduction in System Sound Preferences
284 147 Adrian Georgescu
 * Use OPUS codec, with the AEC disabled, it will cover up to 20kHz audio spectrum
285 147 Adrian Georgescu
286 1 Tijmen de Mes
h3. DTMF
287 57 Adrian Georgescu
288 1 Tijmen de Mes
Dial tones are used to interact with PBX and IVR systems or legacy PSTN gateways. To send DTMF tones, focus the Audio Call by clicking on it. The current call is already focused if you just started it. What you then type on the keyboard is automatically translated into DTMF tones. Alpha-numeric keys are translated into numeric DTMF keys as they are on a numeric telephone keypad. Also you may use the dialpad for this purpose.
289 141 Adrian Georgescu
290 147 Adrian Georgescu
If a telephone number with a # sign is dialed, what comes after the # sign will be automatically entered as DTMF codes once the call is connected. Supported DTMF codes are 0-9&#42;#. You can use the comma sign ',' to insert a one second pause (version &gt;=1.5.1). You can use other delimiter by setting it in Phone Numbers advanced section of the SIP Account. 
291 1 Tijmen de Mes
292 147 Adrian Georgescu
You can paste a string containing 0 to 9 digits, # and * from the Clipboard in the active audio call. These are then sent out as DTMF codes.
293 147 Adrian Georgescu
294 1 Tijmen de Mes
h3. Hangup
295 1 Tijmen de Mes
296 1 Tijmen de Mes
To hangup click on the _Red handset_ displayed for each Audio Session in the right hand side of the drawer or press the Escape key.
297 1 Tijmen de Mes
298 1 Tijmen de Mes
h3. Hold/Unhold
299 1 Tijmen de Mes
300 1 Tijmen de Mes
The shortcut key for hold and unhold of the selected session is Space.
301 33 Tijmen de Mes
302 6 Tijmen de Mes
h3. Record
303 1 Tijmen de Mes
304 1 Tijmen de Mes
To record click on the _Black circle_. While recording, the circle will toggle between red and black. Recorded sessions can be found in menu _Audio -&gt; Recordings_.
305 1 Tijmen de Mes
306 1 Tijmen de Mes
h3. Transfer
307 1 Tijmen de Mes
308 1 Tijmen de Mes
To blindly transfer a call, just drag it to a contact in the Contacts list. You can also enter a number or address in the search bar, to transfer a call to an arbitrary address.
309 1 Tijmen de Mes
310 1 Tijmen de Mes
To perform an assisted call transfer, first establish a call to each party. Then, click on the T button for completing the transfer, a contextual menu is presented.
311 6 Tijmen de Mes
312 6 Tijmen de Mes
h3. Call History
313 36 Tijmen de Mes
314 8 Tijmen de Mes
History of previous sessions is available in the _History_ menu. If you have registered a SIP Account with Blink, you can review the missed calls while Blink was off-line in _Account-&gt; Settings on SIP Server -&gt; History_ menu.
315 61 Adrian Georgescu
316 1 Tijmen de Mes
h3. Redial
317 33 Tijmen de Mes
318 6 Tijmen de Mes
To redial the last session type Command-R, to redial a previous session select it in the History menu.
319 6 Tijmen de Mes
320 1 Tijmen de Mes
h3. iTunes Integration
321 1 Tijmen de Mes
322 33 Tijmen de Mes
iTunes automatically pauses playing before any _Audio Call_ pauses and resumes playing after all _Audio Calls_ have finished. This functionality does not work when Blink runs in Sandbox mode (starting with Pro version 1.9.0 and Lite version 1.7.0) due to Apple imposed restrictions.
323 33 Tijmen de Mes
324 6 Tijmen de Mes
h3. Audio Information
325 6 Tijmen de Mes
326 6 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-ICE.jpg!
327 75 Adrian Georgescu
328 75 Adrian Georgescu
Audio Calls have status indication about the progress of establishment of the RTP stream and ICE negotiation, the negotiated codec and the presence of encryption for signaling and media.
329 36 Tijmen de Mes
330 8 Tijmen de Mes
The RTP end-points and negotiated ICE candidates (when ICE negotiation succeeded) are displayed when hovering the mouse over the Audio codec information area.
331 38 Tijmen de Mes
332 22 Tijmen de Mes
h3. Phone Numbers
333 6 Tijmen de Mes
334 1 Tijmen de Mes
To dial a phone number, just enter the number in the _Search Box_ followed by Enter or Return key.
335 33 Tijmen de Mes
336 6 Tijmen de Mes
When dialing numbers by selecting entries from the Address Book it is recommended that you store your numbers in international E.164 format (that is + sign followed by the country code then the subscriber number).
337 33 Tijmen de Mes
338 1 Tijmen de Mes
You can set in the account _Advanced -&gt; Phone Numbers_ preferences section how to replace the + sign with another prefix recognized by your SIP service provider or PBX. For example if you set _Replace Starting +_ with 001, when you dial +44XXX the number will be dialed as 00144XXX.
339 6 Tijmen de Mes
340 6 Tijmen de Mes
Optionally, phone numbers can be also prefixed before dialing out, for example if a 9 is required by your PBX by setting the _External Line Prefix_ option.
341 1 Tijmen de Mes
342 6 Tijmen de Mes
If you have created a SIP Account with Blink, you can call to PSTN numbers if you must have a positive credit. You can use a Credit Card to add _Credit_ to your SIP Account in menu _Tools -&gt; Call To Phone Numbers..._. You may request the assignment of a PSTN Caller Id by opeing a ticket in the server support interface. Recognized number formats are + or _00_ followed by the _Country Code_ and then _Subscriber Number_.
343 33 Tijmen de Mes
344 1 Tijmen de Mes
If you use another SIP Account than the one provided by Blink, access to the PSTN is subject to the support provided by your SIP service provider. The number format depends as well on the conventions imposed by the SIP service provider in question.
345 33 Tijmen de Mes
346 6 Tijmen de Mes
h3. Voicemail
347 6 Tijmen de Mes
348 1 Tijmen de Mes
Voicemail is a feature provided for SIP accounts created by Blink. It is provided by the network while Blink is offline, when the call forwarding to Voicemail is activated. To change the settings of your SIP2SIP voicemail box dial _1233_. You can record your unavailable message and listen to your messages stored on the server. The voicemail delivered method (by email attachement or by dialing into the server) is set in menu _Tools -&gt; Settings on SIP server_ in the Voicemail section.
349 1 Tijmen de Mes
350 6 Tijmen de Mes
h3. Answering Machine
351 88 Adrian Georgescu
352 88 Adrian Georgescu
When the _Answering Machine_ is enabled, Audio Call requests will be automatically answered with either the standard or the custom recorded message after the delay configured set in _Preferences -&gt; Answering Machine_ settings.
353 88 Adrian Georgescu
354 88 Adrian Georgescu
You can enable the _Answering Machine_ using the menu item _Tools -&gt; Enable Answering Machine_. The incoming Audio Calls are then recorded and can be listened to later in _Tools -&gt; Recordings_ menu.
355 6 Tijmen de Mes
356 116 Adrian Georgescu
While the _Answering Machine_ is handling an Audio Call, you can hear what the remote party is speaking while your microphone is muted. If you wish you can take over by clicking on the _Green Handset_ icon in the Audio drawer. The recording stops and the session is connected to the microphone.
357 116 Adrian Georgescu
358 116 Adrian Georgescu
h3. Audio Conference
359 116 Adrian Georgescu
360 76 Adrian Georgescu
!http://icanblink.com/images/BlinkScreenshot-AudioConference.jpg!
361 120 Adrian Georgescu
362 120 Adrian Georgescu
Drag and drop _Audio Calls_ on top of each other to create a "Conference":http://icanblink.com/screenshots.phtml#audio_conference or use the button presented at the botton at the _Audio Drawer_ to start a _Conference_ with all active _Audio Calls_.
363 120 Adrian Georgescu
364 120 Adrian Georgescu
Add new participants to a Conference by dragging Contacts from the _Contacts list_ onto an _Audio Call_.
365 6 Tijmen de Mes
366 124 Adrian Georgescu
Each participant can be muted individually by pressing on the microphone symbol that appears on each conferenced session.
367 124 Adrian Georgescu
368 124 Adrian Georgescu
To end an _Audio Conference_ drag the session out of the conference area or press the _Conference_ button again.
369 124 Adrian Georgescu
370 6 Tijmen de Mes
There can be only one active _Audio Conference_ at any given time.
371 36 Tijmen de Mes
372 9 Tijmen de Mes
h2. Chat Sessions
373 132 Adrian Georgescu
374 132 Adrian Georgescu
Chat sessions work like Audio Calls in the sense that a session is established after the called party explicitly accepts the invitation and for each message there is a delivery report available.  This is different to Send Message, which is a fire and forget action with no guarantees of the delivery.
375 132 Adrian Georgescu
376 132 Adrian Georgescu
!http://icanblink.com/images/BlinkScreenshot-ServerConference.jpg!
377 6 Tijmen de Mes
378 6 Tijmen de Mes
_Chat Sessions_ are displayed into the "Chat window":http://icanblink.com/screenshots.phtml#chat_sessions. For each recipient there is a new Tab created at the bottom of the window. The Tabs are matched based on the SIP Address of the recipient and the _Chat Aliases_ configured for the Contacts.
379 6 Tijmen de Mes
380 1 Tijmen de Mes
The lateral drawer display the active participants present in the chat session or multi-party conference.
381 135 Adrian Georgescu
382 135 Adrian Georgescu
_Chat Sessions_ are encrypted using TLS and handled like the _Audio Sessions_, a _Chat Session_ is established only to the device where the user accepts the session. _Chat sessions_ can carry arbitrarily large amounts of text information.
383 135 Adrian Georgescu
384 135 Adrian Georgescu
You can start a _Chat Session_ by right-clicking on a _Contact_ and chose _Start Chat Session_.
385 33 Tijmen de Mes
386 9 Tijmen de Mes
Messages typed before the session is accepted by the remote party are queued and delivered once the session has been established. If the session fails to establish, the undelivered messages will be resent at the next successful attempt.
387 1 Tijmen de Mes
388 140 Adrian Georgescu
Message marked with a red color background have failed to be delivered.
389 140 Adrian Georgescu
390 140 Adrian Georgescu
To an established _Chat Session_ you can add _Audio_ or start a _Screen Sharing_ session by clicking on the buttons presented on the toolbar.
391 140 Adrian Georgescu
392 33 Tijmen de Mes
To review previous chat conversations go to menu _History -&gt; Chat Conversations_.
393 6 Tijmen de Mes
394 1 Tijmen de Mes
To insert an empty line use Shift-Enter combination.
395 6 Tijmen de Mes
396 18 Tijmen de Mes
The rendering of Emoticons can be disabled in each chat window, this can be useful to transfer programming code snippets without interpreting the special characters as emoticons.
397 36 Tijmen de Mes
398 147 Adrian Georgescu
h2. Presence
399 147 Adrian Georgescu
400 147 Adrian Georgescu
Presence is a complex topic as it requires specialized infrastructure not all SIP providers posses. See http://projects.ag-projects.com/news/15
401 147 Adrian Georgescu
402 9 Tijmen de Mes
h2. Short Messages
403 6 Tijmen de Mes
404 1 Tijmen de Mes
_Short Messages_ is the way to interact with legacy SIP IM clients that do not support session based _Chat Sessions_ using MSRP protocol. 
405 1 Tijmen de Mes
406 1 Tijmen de Mes
_Short Messages_ are stand-alone entities that operates in a fire and forget fashion. There is no guarantee for delivery or alerting of the final recipient. _Short Messages_ end-up on all SIP devices registered for the remote SIP Account, including hardware phones that accept such messages but do not display them, the recipient has no control where to receive them.
407 1 Tijmen de Mes
408 1 Tijmen de Mes
_Short Messages_ have no end-to-end delivery report and cannot be encrypted the way Chat Sessions are. For guaranteed message delivery and encryption you must use Chat Sessions.
409 1 Tijmen de Mes
410 1 Tijmen de Mes
A _Short Message_ cannot exceed 1300 characters on IP networks and 160 on PSTN mobile networks.
411 1 Tijmen de Mes
412 1 Tijmen de Mes
You can send a _Short Message_ by right-clicking on a _Contact_ and chose _Send SMS_.
413 1 Tijmen de Mes
414 1 Tijmen de Mes
Previous exchanged messages can be reviewed in the menu _Window -&gt; Chat History_.
415 1 Tijmen de Mes
416 36 Tijmen de Mes
h2. File Transfers
417 1 Tijmen de Mes
418 1 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-FileTransfer.jpg!
419 1 Tijmen de Mes
420 38 Tijmen de Mes
To send a file you can use drag and drop from Finder or other application like iPhoto onto a Contact, to a Chat Window or by right clicking on a Contact and then selecting _Send File..._ option.
421 1 Tijmen de Mes
422 1 Tijmen de Mes
_File Transfers_ are displayed in a "separate window":http://icanblink.com/screenshots.phtml#file_transfers. Each file has a progress bar attached with estimated transfer speed and remaining time.
423 1 Tijmen de Mes
424 1 Tijmen de Mes
h2. Screen Sharing
425 1 Tijmen de Mes
426 1 Tijmen de Mes
Screen Sharing is implemented by using standard VNC protocol over an MSRP connection. The minimum bandwidth required for a reasonable experience us 1 Mbit/s. Make sure that all debugging is disabled during Screen Sharing as it can overload the CPU.
427 1 Tijmen de Mes
428 1 Tijmen de Mes
The party sharing the Screen must have enabled _Screen Sharing_ in _System Preferences_ and set the option _Anyone may request permission to control screen_ in Computer Settings section of the _Share Screen_ panel.
429 1 Tijmen de Mes
430 1 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-ScreenSharingServerSetup.jpg!
431 1 Tijmen de Mes
432 1 Tijmen de Mes
433 1 Tijmen de Mes
h3. Screen Sharing Party
434 1 Tijmen de Mes
435 1 Tijmen de Mes
First Blink alerts the user about an incoming request for Screen Sharing. If accepted, MacOSX VNC server will asks to confirm the Screen Sharing request. The request originates from the localhost (127.0.0.1) as the connection runs through Blink.
436 1 Tijmen de Mes
437 33 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-ScreenSharingServerConfirmation.jpg!
438 6 Tijmen de Mes
439 6 Tijmen de Mes
440 33 Tijmen de Mes
h3. Screen Viewer Party
441 6 Tijmen de Mes
442 33 Tijmen de Mes
The party asking for Screen Sharing must select the option 'Connect by Asking for Permission' when prompted by the VNC viewer.
443 6 Tijmen de Mes
444 16 Tijmen de Mes
!http://icanblink.com/images/BlinkScreenshot-ScreenSharingClientRequest.jpg!
445 6 Tijmen de Mes
446 36 Tijmen de Mes
447 6 Tijmen de Mes
h2. NAT Traversal
448 38 Tijmen de Mes
449 1 Tijmen de Mes
For NAT traversal you must rely on your SIP service provider. In general, every SIP service provides relaying for both signaling and media, which takes care of the NAT issue. This means that no special settings are necessary in the client.
450 6 Tijmen de Mes
451 6 Tijmen de Mes
h3. Audio
452 25 Tijmen de Mes
453 1 Tijmen de Mes
For _Audio Calls_ you can enable the use of ICE negotiation in _Advanced -&gt; NAT Traversal -&gt; Use ICE_. ICE requires the presence of STUN servers, they must be provided by the SIP service provider. The ICE negotiation details are displayed in "RTP Logs window":http://icanblink.com/screenshots.phtml#logs_ice. While the ICE negotiation progresses, its status is also displayed in the Audio Call information, for example the gathering of ICE the candidates and the probing of the remote candidates.
454 6 Tijmen de Mes
455 1 Tijmen de Mes
Once the audio stream is established, the audio information area is updated with the negotiated codec type and the sample rate. The active RTP end-points and the ICE candidates types are displayed while "hovering the mouse":http://icanblink.com/screenshots.phtml#rtp_endpoints over the audio status information area.
456 33 Tijmen de Mes
457 6 Tijmen de Mes
h3. IM and File Transfers
458 6 Tijmen de Mes
459 1 Tijmen de Mes
To traverse the NAT for MSRP related sessions (Instant Messaging, File Transfer) a "MSRP relay":http://msrprelay.org configured for the called party domain is needed. The SIP service provider that provides the SIP Account must support this feature (e.g. http://sip2sip.info).
460 33 Tijmen de Mes
461 1 Tijmen de Mes
h3. Screen Sharing
462 24 Tijmen de Mes
463 6 Tijmen de Mes
To traverse the NAT for Screen Sharing sessions a "MSRP relay":http://msrprelay.org configured for the called party domain is needed. The SIP service provider that provides the SIP Account must support this feature (e.g. http://sip2sip.info).
464 33 Tijmen de Mes
465 9 Tijmen de Mes
h2. Growl Notifications
466 6 Tijmen de Mes
467 1 Tijmen de Mes
Growl notifications are raised for missed sessions and the Dock Icon badge is updated with the number of missed sessions.
468 101 Adrian Georgescu
469 6 Tijmen de Mes
When sessions are accepted elsewhere and the SIP server supports the Reason header, the sessions will be logged in the incoming section rather than the missed section.
470 116 Adrian Georgescu
471 116 Adrian Georgescu
h2. Logs
472 116 Adrian Georgescu
473 116 Adrian Georgescu
"Logs Window":http://icanblink.com/screenshots.phtml#logs helps troubleshoot network traffic for various protocols used by Blink. For example, one can follow in the self scrolling interface the time sequence of all DNS lookups and SIP messages exchanged with the other end-points.
474 116 Adrian Georgescu
475 120 Adrian Georgescu
To see what Blink is doing under the hood go to the menu _Window -&gt; Logs_. It is advisable not to leave MSRP Trace and Notifications Logs turned on unless you really need them for debugging purposes, they are very demanding in terms of CPU load during File Transfer and Screen Sharing sessions.
476 120 Adrian Georgescu
477 120 Adrian Georgescu
h2. Server Settings
478 120 Adrian Georgescu
479 120 Adrian Georgescu
!http://icanblink.com/images/BlinkScreenshot-DND.jpg!
480 124 Adrian Georgescu
481 124 Adrian Georgescu
Blink is integrated with the SIP2SIP server functionality. One can change settings directly on the SIP server like Call Forwarding, Do Not Disturb, list of last missed sessions and other settings.
482 124 Adrian Georgescu
483 124 Adrian Georgescu
The settings are displayed in "Server Settings window":http://icanblink.com/screenshots.phtml#server_settings. The window is actually a web interface that loads the URL configured in the _Advanced -&gt; Server -&gt; Settings URL_ for each SIP Account. The remote web server can support digest authentication, Blink sends the SIP Account credentials when prompted by the server.
484 124 Adrian Georgescu
485 124 Adrian Georgescu
h2. Audio Devices
486 124 Adrian Georgescu
487 132 Adrian Georgescu
Blink auto-detects audio devices there are plugged in and out on the fly and prompts the user to switch to a new added device. You can switch automatically by setting this option in Preferences -&gt; Audio section.
488 132 Adrian Georgescu
489 132 Adrian Georgescu
To selected a particular audio device use the menu _Audio_.
490 132 Adrian Georgescu
491 132 Adrian Georgescu
h2. Preferences
492 132 Adrian Georgescu
493 132 Adrian Georgescu
!http://icanblink.com/images/BlinkScreenshot-Preferences.jpg!
494 132 Adrian Georgescu
495 135 Adrian Georgescu
To change Blink configuration go to menu _Preferences_. The Preferences "window":http://icanblink.com/screenshots.phtml#preferences appears.
496 135 Adrian Georgescu
497 135 Adrian Georgescu
Find out more information about a particular setting by hovering the mouse over it.
498 135 Adrian Georgescu
499 135 Adrian Georgescu
Each SIP Account has advanced options available, to reveal them click on the small triangle presented under the SIP Address.
500 135 Adrian Georgescu
501 135 Adrian Georgescu
Blink preferences are stored in _~/Library/Application Support/Blink Pro_ folder. You can reset Blink by deleting this folder.
502 140 Adrian Georgescu
503 140 Adrian Georgescu
Blink SIP accounts and settings are stored in _~/Library/Application Support/Blink Pro/config_ file.
504 140 Adrian Georgescu
505 140 Adrian Georgescu
GUI preferences are stored in _~/Library/Preferences/com.agprojects.Blink.plist_ file. (e.g. size, location of the windows and other MacOSX related settings).
506 140 Adrian Georgescu
507 140 Adrian Georgescu
If you ever want to move your Blink configuration to another login account you must edit the content of your _config_ file and replace the absolute file paths accordingly. You can edit this file with any text editor as long as you do not break the return lines and formatting of the file.
508 140 Adrian Georgescu
509 140 Adrian Georgescu
h3. Codecs
510 140 Adrian Georgescu
511 140 Adrian Georgescu
Blink supports _G722_ and _Speex_ wide-band codecs. The order of the codecs can be configured in menu _Preferences -&gt; Advanced -&gt; RTP Media_ and for each SIP Account in _Preferences -&gt; Accounts -&gt; Advanced -&gt; RTP Media_.
512 147 Adrian Georgescu
513 147 Adrian Georgescu
h3. Open Browser on Incoming Call
514 147 Adrian Georgescu
515 147 Adrian Georgescu
You can configure Blink Pro to automatically open a web browser on an incoming call event. For this set the _Alert URL_ in _Preferences -&gt; Accounts -&gt; Selected Account -&gt; Advanced -&gt; Web Alert_ section.
516 147 Adrian Georgescu
517 147 Adrian Georgescu
The URL may contain the following variables that will be replaced with the actual information from the incoming session:
518 147 Adrian Georgescu
519 147 Adrian Georgescu
* $caller&#95;party - the SIP address of the caller party
520 147 Adrian Georgescu
* $caller&#95;username - the username part of the SIP address of the caller party
521 147 Adrian Georgescu
* $called&#95;party - the SIP address of the account being called
522 147 Adrian Georgescu
523 147 Adrian Georgescu
Example: http://www.example.com?caller=$caller&#95;party&amp;called=$called&#95;party
524 147 Adrian Georgescu
525 147 Adrian Georgescu
The web page can be opened when call comes in or after it was answered. 
526 147 Adrian Georgescu
527 147 Adrian Georgescu
The web page can be opened in a Blink window or in the default web browser (check option in _Preferences -&gt; Advanced -&gt; GUI Settings_)
528 1 Tijmen de Mes
529 1 Tijmen de Mes
h2. History Database
530 1 Tijmen de Mes
531 1 Tijmen de Mes
Blink stores the history of sessions and chat messages in a Sqlite database. The location of the database is:
532 1 Tijmen de Mes
533 1 Tijmen de Mes
<pre>
534 1 Tijmen de Mes
~/Library/Application Support/Blink Pro/history/history.sqlite
535 1 Tijmen de Mes
</pre>
536 1 Tijmen de Mes
537 1 Tijmen de Mes
538 1 Tijmen de Mes
If for any reason the database becomes corrupted, which may manifest itself by errors reported graphically by Blink itself or in the Console application you may work around the problems in several ways.
539 1 Tijmen de Mes
540 1 Tijmen de Mes
First, backup your database in case you need the uncorrupted data in the future. You can do this by copying the history.sqlite file to another location. The file can be opened in *Terminal* application using *sqlite3* program. You can dump the old data in the corrupted database as follows:
541 1 Tijmen de Mes
542 1 Tijmen de Mes
<pre>
543 1 Tijmen de Mes
#:~/Library/Application Support/Blink Pro/history$sqlite3 history.sqlite 
544 1 Tijmen de Mes
SQLite version 3.7.7 2011-06-25 16:35:41
545 1 Tijmen de Mes
Enter ".help" for instructions
546 1 Tijmen de Mes
Enter SQL statements terminated with a ";"
547 1 Tijmen de Mes
sqlite> select * from sessions;
548 1 Tijmen de Mes
sqlite> select * from chat_messages;
549 1 Tijmen de Mes
</pre>
550 1 Tijmen de Mes
551 1 Tijmen de Mes
552 1 Tijmen de Mes
h3. Restore Procedure
553 1 Tijmen de Mes
554 1 Tijmen de Mes
Try the following in this order to solve a data corruption problem:
555 1 Tijmen de Mes
556 1 Tijmen de Mes
* Clear the session history table, go to menu _History-&gt; Clear History_. The session table will be emptied and the chat messages are not affected. Restart Blink.
557 1 Tijmen de Mes
* Stop Blink. Remove history.sqlite file, the history database will be recreated at start time. Use the backup file for reading the old data using the sqlite3 command line utility.