Gui progress
Version 254 (Adrian Georgescu, 07/30/2009 11:05 am)
1 | 1 | Adrian Georgescu | [[TOC(gui_progress, depth=3)]] |
---|---|---|---|
2 | 1 | Adrian Georgescu | |
3 | 74 | Adrian Georgescu | = Audio sessions = |
4 | 1 | Adrian Georgescu | |
5 | 195 | Adrian Georgescu | 1. '''Mute''' microphone when pressing mute button |
6 | 230 | Adrian Georgescu | 1. Add a '''record button''' left to Hold button. When pressed toggle recording the audio session |
7 | 235 | Adrian Georgescu | 1. Display RTP '''packet loss''' with red above the session buttons when > 0.5 %, sample every 10 seconds |
8 | 222 | Adrian Georgescu | 1. Display '''Ringing...''' when get ringing indication from remote party |
9 | 231 | Adrian Georgescu | 1. Closing many active sessions cause many tones to be played back. Throttle tones playback |
10 | 195 | Adrian Georgescu | 1. Call '''set_audio_devices()''' when changing the audio device or tail_length in global Preferences |
11 | 236 | Adrian Georgescu | 1. Calls made with bonjour account that do not resolve in DNS do not end, try dial abcd |
12 | 238 | Adrian Georgescu | 1. After starting many calls some remain in '''Initiating session''' state and no button can be pressed and remain in the drawer |
13 | 193 | Adrian Georgescu | 1. ~~Play '''ringtones'''~~ |
14 | 248 | Adrian Georgescu | 1. ~~'''Cancel''' is not handled for incoming sessions, the pop-up remains active~~ |
15 | 248 | Adrian Georgescu | 1. ~~With every new incoming session the window shrinks in size~~ |
16 | 248 | Adrian Georgescu | 1. ~~After the second call is canceled the window does not auto close anymore and one previous canceled call remains on top~~ |
17 | 179 | Adrian Georgescu | 1. ~~ Incoming sessions do not display '''session information''' and the control buttons are missing~~ |
18 | 179 | Adrian Georgescu | 1. ~~ When '''rejecting a session''' it creates an entry in the drawer~~ |
19 | 178 | Adrian Georgescu | 1. ~~'''Maximize drawer''' when it opens the first time, it seem to open only 80% now ~~ |
20 | 146 | Adrian Georgescu | 1. ~~Playback DTMF tones~~ |
21 | 115 | Adrian Georgescu | 1. ~~ A terminated session must '''disappear from the drawer''' automatically after 5 seconds ~~ |
22 | 115 | Adrian Georgescu | 1. ~~ Remaining sessions must '''shuffle to the top''' when a session ends~~ |
23 | 115 | Adrian Georgescu | 1. ~~ Toggle hold does not change hold '''button color''' ~~ |
24 | 115 | Adrian Georgescu | 1. ~~ Update session audio information with '''Hold by remote''' when held by remote party ~~ |
25 | 115 | Adrian Georgescu | 1. ~~ Only one audio session can be '''active at a time''', all other existing audio sessions must be put on hold~~ |
26 | 1 | Adrian Georgescu | 1. ~~ Highlight the '''active session''' with a bold border, click on a session to select it as the active session~~ |
27 | 140 | Adrian Georgescu | 1. ~~ When the active session is selected, what is typed on the keyboard must be transmitted as '''DTMF tones'''~~ |
28 | 115 | Adrian Georgescu | 1. ~~ When a call is connected move keyboard focus to it ~~ |
29 | 115 | Adrian Georgescu | 1. ~~ When a session has ended, display it for '''5 more seconds''' then hide it and shuffle the deck ~~ |
30 | 115 | Adrian Georgescu | 1. ~~ Add an item '''Show audio sessions''' to the '''Session menu''' to show the drawer, if it was closed (activated the View -> Toggle Sessions Drawer) ~~ |
31 | 147 | Adrian Georgescu | 1. ~~ '''Scroll bar''' appears as result of multiple sessions, but it does not disappear when the number of session decreases~~ |
32 | 147 | Adrian Georgescu | 1. ~~ '''Hangup All''' is not implemented~~ |
33 | 156 | Adrian Georgescu | 1. ~~Display icon with lock when sRTP is active~~ |
34 | 161 | Adrian Georgescu | 1. ~~ Disable Hangup All button if no session is active~~ |
35 | 150 | Adrian Georgescu | 1. ~~ Disable Conference button if less than two sessions active~~ |
36 | 160 | Adrian Georgescu | 1. ~~Allow the session end button for incoming sessions, which have not yet been established (waiting for the ACK message) ~~ |
37 | 1 | Adrian Georgescu | |
38 | 1 | Adrian Georgescu | = Chat sessions = |
39 | 224 | Adrian Georgescu | |
40 | 252 | Adrian Georgescu | 1. When using a relay during stream initialization print system message: '''MSRP session reserved at relay host:port''' |
41 | 252 | Adrian Georgescu | 1. Use the '''same look and feel''' for the toolbar buttons as the main interface (greyish buttons) |
42 | 252 | Adrian Georgescu | 1. If an audio session exists to or from the chat recipient, replace or append after the Audio button '''Record|Hold|Terminate''' buttons |
43 | 252 | Adrian Georgescu | 1. When click on the Audio button, create a new '''audio only session''' from scratch (as opposed to add_stream) |
44 | 252 | Adrian Georgescu | 1. Use same '''+ button''' from the main interface for add contact ''(not sure about this, having add an arbitrary contact in multiple places is redundant and can be confusing)'' |
45 | 252 | Adrian Georgescu | 1. Display the number of '''un-read messages''' in non-active tabs within a red circle over the tab name |
46 | 253 | Adrian Georgescu | 1. To close a tab add a '''small x button''' to it |
47 | 252 | Adrian Georgescu | 1. When dragging a recipient tab outside of the window '''spawn a new chat window''' and move the session into it |
48 | 252 | Adrian Georgescu | 1. When start typing send a message with '''is-composing''' payload. This requires implementing the is-composing payload parser, see http://sipsimpleclient.com/ticket/40. If user has deleted the typed text before sending it update is-composing. |
49 | 252 | Adrian Georgescu | 1. Display is-composing information received from the other end |
50 | 252 | Adrian Georgescu | 1. '''Auto-accept''' chat only sessions when caller is in the contacts list (tricky because of aliases). Use the SIP URI user@domain from the From header of the INVITE to match the contact |
51 | 245 | Adrian Georgescu | 1. ~~Rename '''Close chat''' button to '''Close'''~~ |
52 | 244 | Adrian Georgescu | 1. ~~Rename Call button text with '''Audio'''~~ |
53 | 246 | Adrian Georgescu | 1. ~~If not connected, change Close button to '''Connect'''~~ better keep Connect and Close separate |
54 | 247 | Adrian Georgescu | 1. ~~When connecting, grey the action button and display '''Connecting''' until the session is in either connected or terminated state~~ |
55 | 247 | Adrian Georgescu | 1. ~~ Add timestamp for system messages~~ |
56 | 247 | Adrian Georgescu | 1. ~~When connected print system message: '''MSRP chat session established to MSRP_URI'''~~ |
57 | 247 | Adrian Georgescu | 1. ~~When disconnected print system message: '''MSRP chat session terminated (reason)'''~~ |
58 | 224 | Adrian Georgescu | 1. ~~When pressing the IM button in the main interface just '''open the chat window''' and display the last conversation from history, do not start a session automatically~~ |
59 | 1 | Adrian Georgescu | 1. ~~Start session when user '''starts typing''' or by pressing the Connect button~~ |
60 | 253 | Adrian Georgescu | 1. ~~Do not close the chat tab/window after the session ends~~ |
61 | 228 | Adrian Georgescu | 1. ~~Read history directory from '''global.chat.history_directory''' setting~~ |
62 | 1 | Adrian Georgescu | 1. ~~Remove confirmation window with: "There is an active chat session, would you like to terminate and close it?"~~ ''(left confirmation for more than 1 sessions)'' |
63 | 1 | Adrian Georgescu | 1. ~~Do not play an '''audible tone when terminating''' a chat session, the stop tone is for audio session only~~ |
64 | 243 | Adrian Georgescu | 1. ~~Display session information inline with a different border color~~ |
65 | 243 | Adrian Georgescu | 1. ~~CPIM parser cannot pase Display names equal to one space~~ |
66 | 164 | Adrian Georgescu | 1. ~~Add a '''+''' button (to add contact) in the toolbar~~ |
67 | 174 | Adrian Georgescu | 1. ~~Display the full From and To headers~~ |
68 | 135 | Adrian Georgescu | 1. ~~Use secondary ring tone on output_device when incoming session with chat media only~~ |
69 | 164 | Adrian Georgescu | 1. ~~When close the window or click on close button call session.end() if the session has no other stream or session.remove_stream() otherwise~~ |
70 | 164 | Adrian Georgescu | 1. ~~When click on close, close the tab or the whole window if no tab left~~ |
71 | 1 | Adrian Georgescu | 1. ~~'''Throttle playback''' of audible notifications to maximum one every 3 seconds ~~ |
72 | 180 | Adrian Georgescu | 1. ~~ Display timestamp in HH:MM:ss format to the right side of the window, same lin as From/To header ~~ |
73 | 180 | Adrian Georgescu | 1. ~~Bug: Cannot get rid of existing tabs, they keep growing~~ |
74 | 180 | Adrian Georgescu | 1. ~~Bug: opening and closing chat windows bring up different number of former chat tabs back~~ |
75 | 1 | Adrian Georgescu | 1. ~~Append chat messages to '''chat.history_directory/sip_account/YYYYMMDD-recipient.txt'''~~ |
76 | 131 | Adrian Georgescu | 1. ~~Play an audible message when a message is received, based on '''silent''' and '''general.message_received_sound''' settings~~ |
77 | 157 | Adrian Georgescu | 1. ~~Play an audible message when a message is sent, based on silent and '''general.message_sent_sound''' settings~~ |
78 | 174 | Adrian Georgescu | 1. ~~Add '''File transfer''' button on toolbar~~ |
79 | 218 | Adrian Georgescu | 1. ~~Add '''History''' button on toolbar~~ |
80 | 217 | Adrian Georgescu | |
81 | 217 | Adrian Georgescu | = Multi-party chat = |
82 | 217 | Adrian Georgescu | |
83 | 217 | Adrian Georgescu | 1. How to display participants in a multy-party (drawer?) |
84 | 217 | Adrian Georgescu | 1. Starting a chat to a multiparty server must prompt the user for the Nickname to use for the session. Add a a new dialog window for such sessions: |
85 | 217 | Adrian Georgescu | 1. Room: use last used room |
86 | 131 | Adrian Georgescu | 1. Server: default to '''account.chat.server''' |
87 | 1 | Adrian Georgescu | 1. Nickname |
88 | 167 | Adrian Georgescu | |
89 | 216 | Adrian Georgescu | = Main interface = |
90 | 216 | Adrian Georgescu | |
91 | 254 | Adrian Georgescu | 1. Highlight mute button content with red when pressed |
92 | 249 | Adrian Georgescu | 1. ~~Use '''green + title button''' to collapse/expand the buddy list~~ |
93 | 249 | Adrian Georgescu | 1. ~~Hide + (add contact) button when the interface is collapsed~~ |
94 | 249 | Adrian Georgescu | 1. ~~Add a status bar on the bottom of the window ~~ |
95 | 237 | Adrian Georgescu | 1. ~~Display the NAT type on the status bar~~ |
96 | 249 | Adrian Georgescu | 1. ~~'''Bonjour account''' does not appear when deactivate/activate in preferences~~ |
97 | 249 | Adrian Georgescu | 1. ~~An account marked as active appears immediately in the account list. If registration for the account is active, display text with grey if not registered yet and black if registered~~ |
98 | 167 | Adrian Georgescu | 1. ~~At least one account must be active, use the bonjour acocunt if no accounts are defined ~~ |
99 | 1 | Adrian Georgescu | 1. ~~ The list of account is built based the active attribute of each account alone, registration status has no role~~ |
100 | 167 | Adrian Georgescu | 1. ~~When selecting a different account, mark it as '''default''' using the settings api~~ |
101 | 1 | Adrian Georgescu | 1. ~~Bonjour account does not show up in account list~~ |
102 | 1 | Adrian Georgescu | 1. ~~'''Remove account''' from list when is disabled in preferences ~~ |
103 | 1 | Adrian Georgescu | 1. ~~On startup, '''select the default account''' in the account list~~ |
104 | 132 | Adrian Georgescu | 1. ~~If red Close button is pressed, the main window disappears and is no option to bring it back~~ |
105 | 1 | Adrian Georgescu | 1. ~~No dock icon available~~ |
106 | 195 | Adrian Georgescu | |
107 | 232 | Adrian Georgescu | = Log drawer = |
108 | 236 | Adrian Georgescu | |
109 | 254 | Adrian Georgescu | 1. Lower the font size and use red font in case of errors |
110 | 254 | Adrian Georgescu | 1. Display more useful messages (e.g. DNS lookups, session status) |
111 | 232 | Adrian Georgescu | |
112 | 195 | Adrian Georgescu | = Contacts = |
113 | 132 | Adrian Georgescu | |
114 | 195 | Adrian Georgescu | 1. When add a contact without domain part, always append the '''curent domain''' |
115 | 195 | Adrian Georgescu | 1. Type a '''new group''' in add contact: (NameError: global name 'ContactsGroup' is not defined) |
116 | 195 | Adrian Georgescu | 1. '''Delete the contact''' when pressing delete |
117 | 195 | Adrian Georgescu | 1. Rename '''Add as a contact''' to Add Contact |
118 | 195 | Adrian Georgescu | 1. Hide '''Add contact''' if contact exists |
119 | 1 | Adrian Georgescu | 1. After dialing a found contact, '''display back''' the buddy list |
120 | 199 | Adrian Georgescu | 1. '''Cannot press''' start session buttons for input in search bar if no match found |
121 | 199 | Adrian Georgescu | 1. Show search results from system '''address book''' |
122 | 199 | Adrian Georgescu | |
123 | 199 | Adrian Georgescu | |
124 | 202 | Adrian Georgescu | = Preferences = |
125 | 200 | Adrian Georgescu | |
126 | 200 | Adrian Georgescu | 1. Properly '''align''' horizontally the Advanced settings |
127 | 200 | Adrian Georgescu | 1. Audio device must also list 'Default system input ' and 'Default system output' |
128 | 200 | Adrian Georgescu | 1. ~~Make all text input fields equal in size~~ |
129 | 201 | Adrian Georgescu | 1. '''bonjour account''' has only Display name as main property |
130 | 199 | Adrian Georgescu | 1. Hide the minus button for Bonjour, it cannot be deleted |
131 | 199 | Adrian Georgescu | 1. When password field is changed, re-Register the account |
132 | 242 | Adrian Georgescu | 1. When Register flag is toggled for account, (de)Register the account accordingly |
133 | 199 | Adrian Georgescu | 1. Codec lists must be an ordered list with at least one active codec |
134 | 199 | Adrian Georgescu | 1. '''Stun server''' addresses cannot be set, they seem to inherit the results found in DNS |
135 | 199 | Adrian Georgescu | 1. '''general.rtp.local_ip''': Can't set option local_ip illegal local IP address value: auto |
136 | 199 | Adrian Georgescu | 1. '''general.rtp.port_range''': (AttributeError: 'PortRangeOption' object has no attribute 'save') |
137 | 199 | Adrian Georgescu | 1. '''general.sip.transports''' cannot be saved |
138 | 199 | Adrian Georgescu | 1. '''general.audio.codec_list''' cannot be saved and displays duplicate codecs |
139 | 199 | Adrian Georgescu | 1. '''account.audio.codec_list''' cannot be saved and displays duplicate codecs |
140 | 199 | Adrian Georgescu | 1. '''account.msrp.relay''' cannot be set: global name 'MSRPRelayAddres' is not defined |
141 | 199 | Adrian Georgescu | 1. Display text to the '''left of the checkbox''' instead of the right |
142 | 199 | Adrian Georgescu | 1. ~~'''Delete account Enabled checkbox''', leave only the checkbox in the account list~~ |
143 | 199 | Adrian Georgescu | 1. When '''enable an account''', select it in the main interface account list |
144 | 199 | Adrian Georgescu | 1. ~~ Display the '''bonjour account''' always at the end of the list ~~ |
145 | 199 | Adrian Georgescu | 1. For '''account.ringtone''' advanced setting, the default setting must be inherited from '''general.ringtone.inbound''' |
146 | 199 | Adrian Georgescu | 1. '''general.message_received_sound''' does not fit in window |
147 | 199 | Adrian Georgescu | 1. While clicking on account I got this (cannot reproduce): (TypeError: 'NSAutoreleasePool' object is not iterable) |
148 | 199 | Adrian Georgescu | 1. Check if the wav file is in the right format before saving the settings related to ringtones |
149 | 199 | Adrian Georgescu | 1. Check if the TLS options set by the user are valid before saving them (by loading them outside the engine using gnutls library) |
150 | 199 | Adrian Georgescu | |
151 | 48 | Adrian Georgescu | Display SIP registration state in '''account.advanced.registration''' section. |
152 | 1 | Adrian Georgescu | |
153 | 194 | Adrian Georgescu | = Conferencing = |
154 | 194 | Adrian Georgescu | |
155 | 194 | Adrian Georgescu | Only one conference is possible to make the interface easy to use. |
156 | 1 | Adrian Georgescu | |
157 | 240 | Adrian Georgescu | Start conference as a mixer |
158 | 1 | Adrian Georgescu | |
159 | 185 | Adrian Georgescu | 1. Set the conference bridge to mix audio between all parties |
160 | 240 | Adrian Georgescu | 1. Send a re-INVITE to take each call off hold and set the is-focus attribute of the Contact header |
161 | 240 | Adrian Georgescu | 1. Disable the hold buttons of the conferenced sessions |
162 | 240 | Adrian Georgescu | 1. Draw the active session selection rectangle around the sessions part of the conference |
163 | 151 | Adrian Georgescu | |
164 | 240 | Adrian Georgescu | Stop conference as a mixer |
165 | 42 | Adrian Georgescu | |
166 | 42 | Adrian Georgescu | 1. Set the conference bridge to stop mixing audio |
167 | 240 | Adrian Georgescu | 1. Send a re-INVITE to disable is-focus attribute of the Contact header |
168 | 41 | Adrian Georgescu | 1. Enable the hold buttons |
169 | 1 | Adrian Georgescu | 1. Draw the selection rectangle around the selected session |
170 | 1 | Adrian Georgescu | |
171 | 240 | Adrian Georgescu | New sessions as a mixer |
172 | 1 | Adrian Georgescu | |
173 | 1 | Adrian Georgescu | 1. New sessions are added bellow the conference |
174 | 1 | Adrian Georgescu | 1. A session can be dragged in and out of the conference |
175 | 1 | Adrian Georgescu | 1. When switching from a conference to another single session, do not use hold |
176 | 240 | Adrian Georgescu | |
177 | 240 | Adrian Georgescu | Conference participant |
178 | 240 | Adrian Georgescu | |
179 | 240 | Adrian Georgescu | 1. SUBSCRIBE to the conference event package when receiving a re-INVITE with isfocus true |
180 | 240 | Adrian Georgescu | 1. Expand vertically the session frame to display the names of the participants received in subsequent NOTIFY that contain the list of the participants in the conference |
181 | 240 | Adrian Georgescu | |
182 | 41 | Adrian Georgescu | |
183 | 41 | Adrian Georgescu | = Audio history = |
184 | 96 | Adrian Georgescu | |
185 | 118 | Adrian Georgescu | 1. Use the same session drawer to display previous sessions |
186 | 118 | Adrian Georgescu | 1. Keep same layout as active sessions with the following changes: |
187 | 29 | Adrian Georgescu | 1. Missed calls (incoming un-answered sessions must display the SIP address in red) |
188 | 29 | Adrian Georgescu | 1. Duration line must display also the Start time: HH:MM:SS (YYYY-MM-DD HH:MM ) |
189 | 41 | Adrian Georgescu | 1. Instead of audio session information display: Incoming|Outgoing |
190 | 1 | Adrian Georgescu | 1. Replace the current session buttons with a callback button |
191 | 116 | Adrian Georgescu | 1. Add a Session menu item to toggle the drawer content between active session and history sessions |
192 | 122 | Adrian Georgescu | 1. Show most recent sessions on top |
193 | 41 | Adrian Georgescu | |
194 | 29 | Adrian Georgescu | = Engine = |
195 | 29 | Adrian Georgescu | |
196 | 29 | Adrian Georgescu | 1. If '''engine is dead''', the message '''no sip account is active''' is displayed but is unclear what the real reason is. An engine stop must be logged to general debug window. Not clear how to restart the engine, maybe we should restart the application until a good solution is found |
197 | 29 | Adrian Georgescu | 1. If the engine has stopped (because of some crash) the preferences do not show anymore: |
198 | 29 | Adrian Georgescu | |
199 | 29 | Adrian Georgescu | {{{ |
200 | 29 | Adrian Georgescu | Blink[26992:10b] <type 'exceptions.AttributeError'>: 'Engine' object has no attribute 'output_devices' |
201 | 29 | Adrian Georgescu | }}} |
202 | 29 | Adrian Georgescu | |
203 | 29 | Adrian Georgescu | By setting the wrong TLS certificate files, the middleware does not start anymore: |
204 | 29 | Adrian Georgescu | |
205 | 29 | Adrian Georgescu | {{{ |
206 | 29 | Adrian Georgescu | [Session started at 2009-07-19 10:37:39 +0200.] |
207 | 29 | Adrian Georgescu | Traceback (most recent call last): |
208 | 29 | Adrian Georgescu | File "/Users/adigeo/work/blink/build/Debug/Blink.app/Contents/Resources/BlinkAppDelegate.py", line 40, |
209 | 29 | Adrian Georgescu | in applicationDidFinishLaunching_ |
210 | 29 | Adrian Georgescu | self.backend.init(options) |
211 | 29 | Adrian Georgescu | File "/Users/adigeo/work/blink/build/Debug/Blink.app/Contents/Resources/SIPManager.py", line 108, in init |
212 | 41 | Adrian Georgescu | self._app.start(config_backend=config_be) |
213 | 29 | Adrian Georgescu | File "/Library/Python/2.5/site-packages/sipsimple/api.py", line 85, in start |
214 | 29 | Adrian Georgescu | trace_sip=settings.logging.trace_sip, |
215 | 29 | Adrian Georgescu | File "/Library/Python/2.5/site-packages/sipsimple/engine.py", line 75, in start |
216 | 29 | Adrian Georgescu | self._ua = PJSIPUA(self._handle_event, 1.1.init_options) |
217 | 29 | Adrian Georgescu | File "core.ua.pxi", line 66, in sipsimple.core.PJSIPUA.__init__ (sipsimple/core.c:23189) |
218 | 1 | Adrian Georgescu | File "core.lib.pxi", line 106, in sipsimple.core.PJSIPEndpoint.__cinit__ (sipsimple/core.c:6231) |
219 | 34 | Adrian Georgescu | File "core.lib.pxi", line 167, in sipsimple.core.PJSIPEndpoint._start_tls_transport (sipsimple/core.c:6884) |
220 | 1 | Adrian Georgescu | PJSIPError: Could not create TLS transport: Error loading/verifying SSL CA list file (PJSIP_TLS_ECACERT) |
221 | 155 | Adrian Georgescu | None |
222 | 155 | Adrian Georgescu | }}} |
223 | 155 | Adrian Georgescu | |
224 | 155 | Adrian Georgescu | = Menu structure = |
225 | 155 | Adrian Georgescu | |
226 | 198 | Adrian Georgescu | 1. File |
227 | 198 | Adrian Georgescu | 1. Edit |
228 | 198 | Adrian Georgescu | 1. View |
229 | 155 | Adrian Georgescu | 1. Audio sessions drawer |
230 | 213 | Adrian Georgescu | 1. Previous audio sessions |
231 | 213 | Adrian Georgescu | 1. Previous chat sessions |
232 | 213 | Adrian Georgescu | 1. Audio |
233 | 213 | Adrian Georgescu | 1. Output device selection |
234 | 213 | Adrian Georgescu | 1. Input device selection |
235 | 155 | Adrian Georgescu | 1. Alert device selection |
236 | 155 | Adrian Georgescu | 1. Mute (mute mic input) |
237 | 155 | Adrian Georgescu | 1. Silent (mute output) |
238 | 155 | Adrian Georgescu | 1. Presence |
239 | 1 | Adrian Georgescu | 1. Activity |
240 | 155 | Adrian Georgescu | 1. Available |
241 | 155 | Adrian Georgescu | 1. Phone call |
242 | 198 | Adrian Georgescu | 1. Meeting |
243 | 155 | Adrian Georgescu | 1. Lunch |
244 | 155 | Adrian Georgescu | 1. Dinner |
245 | 155 | Adrian Georgescu | 1. Do not disturb (when enabled reject automatically all audio calls) |
246 | 155 | Adrian Georgescu | 1. Travel |
247 | 155 | Adrian Georgescu | 1. Offline |
248 | 155 | Adrian Georgescu | 1. Holiday |
249 | 155 | Adrian Georgescu | 1. Contacts |
250 | 155 | Adrian Georgescu | 1. Add contact |
251 | 155 | Adrian Georgescu | 1. Delete contact |
252 | 155 | Adrian Georgescu | 1. Edit contact |
253 | 155 | Adrian Georgescu | 1. Add group |
254 | 173 | Adrian Georgescu | 1. Delete group |
255 | 166 | Adrian Georgescu | 1. Edit group |
256 | 166 | Adrian Georgescu | 1. Sessions |
257 | 166 | Adrian Georgescu | 1. New audio session ... |
258 | 166 | Adrian Georgescu | 1. New chat session ... |
259 | 155 | Adrian Georgescu | 1. New multi party chat session ... |
260 | 1 | Adrian Georgescu | 1. Close all audio sessions |
261 | 1 | Adrian Georgescu | 1. Conference audio sessions |
262 | 1 | Adrian Georgescu | |
263 | 142 | Adrian Georgescu | = Presence bar = |
264 | 142 | Adrian Georgescu | |
265 | 1 | Adrian Georgescu | Make it as high as the contacts (two rows high). |
266 | 1 | Adrian Georgescu | |
267 | 142 | Adrian Georgescu | 1. ~~ Show '''own photo''' to the left ~~ |
268 | 1 | Adrian Georgescu | 1. Acquire photo from webcam and cache it |
269 | 1 | Adrian Georgescu | 1. Show '''Display name''' next to the photo on top row |
270 | 142 | Adrian Georgescu | 1. Show '''Presence activity note''' on second row, editable text |
271 | 142 | Adrian Georgescu | 1. Show '''Presence activity''' next to name on top row. Activities: |
272 | 142 | Adrian Georgescu | 1. Available |
273 | 142 | Adrian Georgescu | 1. Phone call |
274 | 142 | Adrian Georgescu | 1. Meeting |
275 | 142 | Adrian Georgescu | 1. Lunch |
276 | 142 | Adrian Georgescu | 1. Dinner |
277 | 142 | Adrian Georgescu | 1. Do not disturb |
278 | 148 | Adrian Georgescu | 1. Travel |
279 | 148 | Adrian Georgescu | 1. Offline |
280 | 7 | Adrian Georgescu | 1. Holiday |
281 | 1 | Adrian Georgescu | |
282 | 7 | Adrian Georgescu | Add a Presence menu item before Session. |
283 | 41 | Adrian Georgescu | |
284 | 41 | Adrian Georgescu | = Debug window = |
285 | 1 | Adrian Georgescu | |
286 | 1 | Adrian Georgescu | 1. Display all traces in a '''debug window''' with tabs for each debug type |
287 | 1 | Adrian Georgescu | 1. Add a '''General messages''' window to the Debug menu, first item |
288 | 1 | Adrian Georgescu | |
289 | 79 | Adrian Georgescu | = GUI settings = |
290 | 41 | Adrian Georgescu | |
291 | 41 | Adrian Georgescu | Remember the following settings between restarts: |
292 | 100 | Adrian Georgescu | |
293 | 14 | Adrian Georgescu | 1. '''Debug window''' and the selected tab |
294 | 47 | Adrian Georgescu | 1. Status of '''contact groups''' - colapsed/expanded and their order |
295 | 102 | Adrian Georgescu | |
296 | 214 | Adrian Georgescu | = Middleware = |
297 | 102 | Adrian Georgescu | |
298 | 102 | Adrian Georgescu | 1. On startup, check if the audio device from the preferences '''is available''' in the detected devices list. If not, set the device to the system default device and display a warning to the user to set the devices in the preferences |
299 | 102 | Adrian Georgescu | 1. Enable logging of notifications to file |
300 | 41 | Adrian Georgescu | 1. Check the validity of the '''TLS''' settings/files before starting the engine |
301 | 41 | Adrian Georgescu | 1. It seems that the '''stun servers''' are learned from the DNS and cannot be overwritten in settings, they show up automatically |
302 | 1 | Adrian Georgescu | 1. If I set the relay to abcd.com standard '''port 2855''' must be used, now is set to zero: relay = abcd.com:0;transport=tls |
303 | 1 | Adrian Georgescu | 1. We need a solution to accept a session without a 180- ringing. For instance we can have automatic answer based on various preferences. |
304 | 1 | Adrian Georgescu | 1. Move '''general.audio.codec_list''' to '''general.rtp.audio_codecs''' |
305 | 1 | Adrian Georgescu | 1. Move '''account.audio.codec_list''' to '''account.rtp.audio_codecs''' |
306 | 1 | Adrian Georgescu | 1. Move '''account.audio.srtp_encryption''' to '''account.rtp.srtp_encryption''' |
307 | 66 | Adrian Georgescu | 1. Delete '''general.audio.playback_dtmf''' setting |
308 | 66 | Adrian Georgescu | 1. Add '''general.audio.mute''' setting |
309 | 66 | Adrian Georgescu | 1. Delete '''account.audio''' section |
310 | 66 | Adrian Georgescu | 1. Add '''account.sip''' section |
311 | 66 | Adrian Georgescu | 1. Move '''account.outbound_proxy''' to '''account.sip.outbound_proxy''' |
312 | 66 | Adrian Georgescu | 1. Move '''account.presence.publish_interval''' to '''account.sip.publish_interval''' |
313 | 68 | Adrian Georgescu | 1. Move '''account.presence.subscribe_interval''' to '''account.sip.subscribe_interval''' |
314 | 109 | Adrian Georgescu | 1. Move '''account.registration.interval''' to '''account.sip.register_interval''' |
315 | 109 | Adrian Georgescu | 1. Delete '''account.ice.use_stun''', it is always true |
316 | 1 | Adrian Georgescu | 1. Rename '''account.ice''' to '''account.nat_traversal''' |
317 | 172 | Adrian Georgescu | 1. Rename '''account.ice.enabled''' to '''account.nat_traversal.enable_ice''' |
318 | 159 | Adrian Georgescu | 1. Delete global.chat.accept_types |
319 | 159 | Adrian Georgescu | 1. Delete global.chat.accept_wrapped_types |
320 | 159 | Adrian Georgescu | 1. Add a new setting '''account.chat.server''' default = chatserver.domain |
321 | 189 | Adrian Georgescu | |
322 | 189 | Adrian Georgescu | = General = |
323 | 1 | Adrian Georgescu | |
324 | 225 | Adrian Georgescu | 1. Set SIP User Agent name to '''blink-<version>''' |
325 | 171 | Adrian Georgescu | 1. ~~Enable logging based on log settings~~ |
326 | 170 | Adrian Georgescu | 1. ~~'''Set global.user_data_directory''' to ~/Library/Application\ Support/Blink/~~ |
327 | 159 | Adrian Georgescu | 1. Scratchy noises when playing tone generator tones |
328 | 159 | Adrian Georgescu | 1. Crash when more than 32 tones in the tone generator queue |
329 | 159 | Adrian Georgescu | 1. Random crashes during functioning always end up in debugger at: |
330 | 159 | Adrian Georgescu | |
331 | 159 | Adrian Georgescu | {{{ |
332 | 159 | Adrian Georgescu | [Switching to process 59222 thread 0x9b73] |
333 | 159 | Adrian Georgescu | (gdb) bt |
334 | 159 | Adrian Georgescu | #0 0x937691c6 in mach_msg_trap () |
335 | 159 | Adrian Georgescu | #1 0x937709bc in mach_msg () |
336 | 159 | Adrian Georgescu | #2 0x9351104e in CFRunLoopRunSpecific () |
337 | 159 | Adrian Georgescu | #3 0x93511c78 in CFRunLoopRunInMode () |
338 | 159 | Adrian Georgescu | #4 0x9411128c in RunCurrentEventLoopInMode () |
339 | 159 | Adrian Georgescu | #5 0x941110a5 in ReceiveNextEventCommon () |
340 | 159 | Adrian Georgescu | #6 0x94110f19 in BlockUntilNextEventMatchingListInMode () |
341 | 159 | Adrian Georgescu | #7 0x96863d0d in _DPSNextEvent () |
342 | 159 | Adrian Georgescu | #8 0x968635c0 in -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] () |
343 | 159 | Adrian Georgescu | #9 0x9685c5fb in -[NSApplication run] () |
344 | 159 | Adrian Georgescu | #10 0x00233855 in ffi_call_SYSV () |
345 | 159 | Adrian Georgescu | #11 0x00233d6c in ffi_call () |
346 | 159 | Adrian Georgescu | #12 0x0024a825 in PyObjCFFI_Caller () |
347 | 159 | Adrian Georgescu | #13 0x00261b63 in PyObjCSelector_GetMetadata () |
348 | 159 | Adrian Georgescu | #14 0x00121505 in PyObject_Call () |
349 | 159 | Adrian Georgescu | #15 0x0018f832 in PyEval_EvalFrameEx () |
350 | 159 | Adrian Georgescu | #16 0x00191173 in PyEval_EvalCodeEx () |
351 | 159 | Adrian Georgescu | #17 0x0018f79d in PyEval_EvalFrameEx () |
352 | 159 | Adrian Georgescu | #18 0x00191173 in PyEval_EvalCodeEx () |
353 | 159 | Adrian Georgescu | #19 0x00191260 in PyEval_EvalCode () |
354 | 159 | Adrian Georgescu | #20 0x001a883c in PyErr_Display () |
355 | 159 | Adrian Georgescu | #21 0x001a8e66 in PyRun_FileExFlags () |
356 | 159 | Adrian Georgescu | #22 0x001aa7d2 in PyRun_SimpleFileExFlags () |
357 | 1 | Adrian Georgescu | #23 0x00001d4e in main (argc=1, argv=0xbfffeef4) at /Users/adigeo/work/blink/main.m:33 |
358 | 1 | Adrian Georgescu | kill |
359 | 1 | Adrian Georgescu | }}} |
360 | 234 | Adrian Georgescu | |
361 | 234 | Adrian Georgescu | = IP connectivity checks = |
362 | 234 | Adrian Georgescu | |
363 | 234 | Adrian Georgescu | If the Internet connectivity goes up and down the client must adjust to this |
364 | 234 | Adrian Georgescu | by taling appropiate actions. It is not enough to detect only what kind of |
365 | 234 | Adrian Georgescu | NAT we are behind but also what kind of IP connectivity we have. |
366 | 234 | Adrian Georgescu | |
367 | 234 | Adrian Georgescu | |
368 | 234 | Adrian Georgescu | == No IP network == |
369 | 234 | Adrian Georgescu | |
370 | 234 | Adrian Georgescu | Posible checks: |
371 | 234 | Adrian Georgescu | |
372 | 234 | Adrian Georgescu | * No real IP |
373 | 234 | Adrian Georgescu | * DNS is down |
374 | 234 | Adrian Georgescu | * No default route |
375 | 234 | Adrian Georgescu | |
376 | 234 | Adrian Georgescu | == LAN without Internet == |
377 | 234 | Adrian Georgescu | |
378 | 234 | Adrian Georgescu | (e.g. wifi hotspot before login) |
379 | 234 | Adrian Georgescu | |
380 | 234 | Adrian Georgescu | Posible checks: |
381 | 234 | Adrian Georgescu | |
382 | 234 | Adrian Georgescu | * Ethernet is up |
383 | 234 | Adrian Georgescu | * DNS is up |
384 | 234 | Adrian Georgescu | |
385 | 234 | Adrian Georgescu | == Internet access == |
386 | 234 | Adrian Georgescu | |
387 | 234 | Adrian Georgescu | Posible checks: |
388 | 234 | Adrian Georgescu | |
389 | 234 | Adrian Georgescu | * Ethernet is up |
390 | 234 | Adrian Georgescu | * DNS is up |
391 | 234 | Adrian Georgescu | * STUN is up |
392 | 234 | Adrian Georgescu | * NAT type |